Model 4097A Cable & Connector Testing System Performance Specifications:
CONTINUITY / CONTACT RESISTANCE
|
Up to 160 Wires (320 Terminations); Resistance Measurements: 0.01 Ohms to 4000 Ohm |
Contact Resistance: 0.004 – 16 Ohms |
INSULATION RESISTANCE
|
5 - 100,000 MΩ, 2% 0 - 1500 VDC Test Voltage, 0.1% 0.1 - 650 Second Programmable Dwell |
100 G - 500 G Ω, 5% 0 - 2500VDC Test Voltage, 0.1% |
DIELECTRIC WITHSTANDING VOLTAGE
|
DC: 0 - 1500 VDC Test Voltage, 0.1% 0 - 1000uA Fail Current, 2% 0.1 - 650 Second Programmable Dwell |
0 - 2500 VDC Test Voltage, 0.1% |
|
AC:: 0 - 1800 VAC, 60Hz, 2% 0 - 2000 uA Fail Current, 2% 0.1 - 650 Second Programmable Dwell Ramp Options: 500 VAC/sec or 200 VAC/cycle |
0 - 2300 VAC Test Voltage, 2% |
CAPACITANCE
|
1pF - 1uF: 1% typical; 2% or 2pF Max whichever is greater at 1KHz Test Capacitance at DC Bias Voltages 0-750VDC |
DISSIPATION FACTOR: 0 - 100%, 0.25% |
|
SHORTED PIN TEST Verify Intentionally Shorted Pins either to ground or to another pin GROUND RING TEST Verify Presence of Ground Ring |
ZENER DIODE / MOV 0 - 750 VDC Test Voltage, Bipolar 1 - 10 mA test current 4.8 - 750 VDC Breakdown Voltage, 0.5% or 0.1V, whichever is greater Selectable Reverse Leakage Limits 1 nA - 10,000nA, 1uA - 1000uA |
AC POWER REQUIREMENTS
|
105 - 125 VAC, 50/60 Hz 350 mA AC Input Current |
Europe 230 VAC, 50Hz |
Ideal for ‘D’ Subminiature, Micro ‘D’ Cables, ARINC and Other Types of Cable Harnesses
Dimensions: 14" W x 14" H x 19" D; Weight = 45 lbs. / 20.4 kg